Filter
Top Products
7. Do not overreach. Keep proper footing and balance at all times.
8. Always use protection. Wear ANSI approved safety impact eye glasses
when using this product. ANSI approved safety impact eye glasses are
available from Harbor Freight Tools.
9. When necessary, use hearing and breathing protection. Wear ANSI
approved hearing protectors when using the Vacuum/Blower for extended
time periods or using it in a noisy work area. For dusty operations, wear an
ANSI approved dust mask. ANSI approved hearing protectors and ANSI
approved dust masks are available from Harbor Freight Tools.
10. Industrial Applications must follow OSHA requirements.
11. Stay Alert. Watch what you are doing at all times. Use common sense.
Do not use this product when you are tired or distracted from the job at
hand.
12. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for damaged parts and any
other condition that may affect proper operation. Any part that is damaged
should be properly repaired or replaced by a qualified technician. Do not use
the tool if any switch does not turn On and Off properly.
13. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are
available from Harbor Freight Tools.
14. Use proper size and type extension cord. If an extension cord is required,
it must be of the proper size and type to supply the correct current to the tool
without heating up. Otherwise, the extension cord could melt and catch fire, or
cause electrical damage to the tool.
15. Maintenance. For your safety, maintenance should be performed regularly
by a qualified technician.
16. Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. Do not modify this tool and do
not use this tool for a purpose for which it was not intended.
SKU 90981 Page 3