Filter
Top Products
Page 15SKU 90715
Changing the Presser Foot
1. Turn the Balance Wheel (9) counterclockwise to raise the needle to its highest
position.
2. Raise the Presser Foot with its Lever (4).
3. Release the Foot by raising its lever (A) located at the back of the holder.
4. Place a different Presser Foot on the needle plate so that the bar on the Presser Foot
is in line with the slot on the shank (B).
5. Lower the Presser Foot lever to fix the Presser Foot onto the shank.
If the Presser Foot is in the correct location, the bar should snap in place.
Converting to Free-arm Style
Free-arm sewing is convenient for sewing tubular and hard-to-reach areas on a garment.
To change the machine to free-arm operation, remove the Extension Table (6).
1. Lift up on the Extension Table (6).
2. Slide the Extension Table to the left.
(B)
(A)