Filter
Top Products
Page 10SKU 90715
OPERATING INSTRUCTIONS
Controls and Indicators
1.
Bobbin Winding Assy. – Winds the thread onto the bobbin to be used for the
lower thread
2.
Spool Holder – Holds the sewing thread
3.
Stitch Length Dial – Controls the length of the stitches
4.
Presser Foot Lever – Raises and lowers the presser foot
5.
Upper Tension Control Dial – Controls the tension of the upper thread
6.
Extension Table and Accessories Compartment – Converts from the free-arm
into a flat bed machine
7.
Mechanical Pattern Indication Window – Shows the stitch to be performed
8.
Reverse Sewing Button – Push for stitching in the reverse direction
9.
Balance Wheel – Turn toward you (counterclockwise) to raise and lower the
needle
10.
Clutch Release Switch – Switches from bobbin winding mode to sewing mode
11.
Pattern Selection Dial – Turn in either direction to select the desired stitch
12.
Foot Controller Receptacle – Receives the foot controller plug
13.
Foot Controller – Used to control sewing speed, start and stop
14.
Main Power Switch – Turns the machine power on and off
15.
Vertical Spool Holder – Used to hold a second spool of thread for twin needle
sewing
(1)