Filter
Top Products
Page 5
SKU 03914
For technical questions, please call 1-800-444-3353.
Sewing Machine
Motor
Power Switch
Knee Lifting Arm
for Presser Foot
Table Stand and
Top (not provided)
Assembly
The assembly instructions describe mounting the Single-Needle Sewing Machine (Model
03914) to the Table Stand (Model 03929), not included. In order to complete this procedure,
you must first purchase and assemble the Table Stand Kit (Model 03929).
1. Locate four corner rests in the rectangular hole of the Table Stand where the machine
will sit.
2. Place two rubber seats (A) on the operator-side, corner rests and secure with
supplied hardware (C). See figure 1.
3. Place two cushion seats (B) on the hinge-side, corner rests and secure with supplied
hardware (C).
4. Seat the Oil Pan (D) on the corner seats (A) and (B). See figure 2.
5. Insert Hinges (E) into the opening in the machine bed. See figure 3.
6. Fit the machine head to the table rubber hinges (F) before placing the machine head
on the corner seats. See figure 4.