Filter
Top Products
OWNER’S MANUAL
4
ASSEMBLY
1-1. Take out all the parts of
the tabletop Heater.
1-2. Aim the cast iron at the
holes on the base.
2-1. Use 4pcs M6X15mm bolts
to fix the tank housing to the
base & cast iron.
2-2. Tighten the bolts as
above show.
3-1. Put the burner on the tank
housing then fix them with
4pcs 3/16” bolts.
4-1. Fix the regulator to the
tank housing with the
M5X10mm bolt & M5 nut.
STEP 4STEP 3
STEP 2STEP 1