Vermont Casting MEAD3EB Furnace User Manual


 
7
30004451
Georgian Cast Surround
Models: 30DVSGTKCB, 30DVSGTKB
DVSGTKCB - Classic black cast iron
DVSGTKB - Ebony black enameled cast iron
NOTE: Cast iron parts can be heavy, an assistant
would be advisable for this installation.
CAUTION: Porcelain enamel is fragile. The finish
can be easily damaged if castings are not handled
carefully. Always place castings on a protective
surface, such as a towel, blanket or carpet.
Tools required: 7/16” wrench, measuring tape, Phil-
lips screwdriver, straight edge, (i.e. yard stick, broom
handle, pc of wood)
Check Contents of Shipping Carton
Compare contents of carton in Figure 10 with actual
parts received. If any parts are missing or damaged,
contact your local dealer before starting installation.
Surround Parts
1. Left Mantel
2. Left Trim
3. Center Trim
4. Right Mantel
5. Right Trim
6. Right Column
7. Left Column
8. Center Mantel
Hardware
9. Hex Head Bolt 1/4-20 x 5/8”, (3)
10. Hex Head Bolt 1/4-20 x 3/8”, (10)
11. Flat Washer (13)
1
8
2
3
7
6
4
5
9
10
11
CAR189
Georgian 30 trim
8/06
Figure 10
CAR189



3/8” Hex Head Bolt
Flat Washer
Center Mantel
Left Mantel
Right Mantel
KT662
Flat Washer
3/8” Hex Head Bolt
Figure 11
Installation
NOTE: In the initial assembly of Steps 1
through 5, all fasteners should be tight-
ened only by hand.
1. Place the right, left and center mantel
pieces on a protected flat surface. Using
two (2) 1/4-20 x 3/8” hex head bolts and
two (2) flat washers, assemble the com-
ponents together finger tight. (Fig.11)