Filter
Top Products
3
30004451
Attach the Surround to the Montpelier
1. Once the insert is installed and tested for proper
operation as directed, stand the Traditional Cast Sur-
round in front of the insert.
2. Position the surround in front of the insert and, with
the help of an assistant, gently lift the surround up
and over the top sheet metal flange. Make sure the
damper tabs are positioned on the back side of the
flange. At the same time, align the bottom brackets
through the slots on the side flanges. (Fig. 3)
3. Adjust the surround, left to right, so there is an equal
reveal and secure by applying downward pressure
until the brackets have engaged onto the insert. (Fig.
3)
Assembly complete.
Side
Flange
Top Flange
Fig. 3 Lift surround up and over top flange and up and through side flange holes.
KT1013