Vermont Casting EWF30 Indoor Fireplace User Manual


 
4
Vermont Castings EWF30
20008662
Specifications
Range of heat output* ............... 11,100 - 40,500 Btu/hr
Maximum heat output** ....... in excess of 55,000 Btu/hr
EPA emissions rating (g/h) ......................................3.5*
Area heated*** .............. Up to 2,400 sq. ft. (223 sq. m)
Size of wood splits ....................18” - 23” (457-584 mm)
Fuel Capacity .......................................... 40lbs. (18 kg)
Loading ..................................................................Front
Flue size .................................................... 8” (203 mm)
Fireplace weight ............................................... 350 lbs.
Primary Air Control ............................................ Manual
Glass panel ......................... High-temperature ceramic
Flue exit position ..................................................... Top
Blower rating ...............................160cfm. (115V, 60Hz)
*Under specific test conditions used during EPA emis
-
sions standard testing.
**This value can vary depending on how the unit is
operated, and the type and moisture content of the fuel
used. Figure shown is based on maximum fuel con-
sumption obtained under laboratory conditions and on
average efficiencies.
***These values are based on operation in building-
code conforming homes under typical winter climate
conditions. If your home is of nonstandard construction
(e.g. unusually well insulated, not insulated, built under
ground, etc.) or if you live in a more severe or more
temperate climate, these figures may not apply. Since
so many variables affect performance, consult your Ver-
mont Castings’ Authorized Dealer to determine realistic
expectations for your home.
EWF30
EWF30 Woodburning Fireplace
Fig. 1 EWF30 specifications and framing.
12”
(305 mm)
26
(667 mm)
27
(692 mm)
Rough Opening Width 39
(1003 mm)
37” (953 mm)
11” Dia.
(279 mm)
5/8” (16 mm)
Recessed
Nailing Flange
32” (826 mm)
37” (953 mm)
48"
(1219 mm)
6
(159 mm)
10”
(254 mm)
Outside Air
44”
(1118 mm)
64" (1638 mm)
64" (1638 mm)
1" (25 mm)
1“
91” (2311 mm)
46
(1172 mm)
5/8" (16 mm)
Electrical
Access
4
(124 mm)
12
(318 mm)
8662
EWF30 specs
3/05
25“ (635 mm)
23” (597 mm)
12"
(318 mm)
12”
(305 mm)
Rough
Opening
Depth
Rough
Opening
Height
3" (76 mm)
36”
(914 mm)
An optional Gravity Vent Kit is available for installation on top of the fireplace as a means to provide additional heat to
the room the fireplace is in or an adjacent room. Installation instructions are provided with the Gravity Vent Kit if using
this option.