Filter
Top Products
DBT33/DBT36/DBT39 -6- 10002789/0
FINAL FINISHING
Non-combustible materials such as brick or tile may be
extended over the edges of the face of the appliance. DO NOT
cover any vent or grille panels.
If a Trim Kit is going to be installed on the replace, the brick
or tile will have to be installed ush with the edges of the
appliance.
GAS SPECIFICATIONS
Max. Min.
Input Input
Model Fuel Gas Control BTU/h BTU/h
DBT33RN Nat. Millivolt 15,000 10,500
DBT33RP Prop. Millivolt 15,000 11,250
DBT36RN Nat. Millivolt 18,000 12,600
DBT36RP Prop. Millivolt 18,000 13,500
DBT39RN Nat. Millivolt 22,000 15,400
DBT39RP Prop. Millivolt 22,000 16,500
GAS INLET & MANIFOLD
PRESSURES
Fig. 3
Fig. 4
DBT33 / DBT36 / DBT39
CERTIFIED TO
ANSI Z21.88b-1999 / CSA Z2.33b-M99
Vented Gas Fireplace Heaters
Inlet Minimum
Inlet Maximum
Manifold Pressure
Natural Gas
LP (Propane)
4.5" WC
7" WC
3.5" WC
11" WC
13" WC
10" WC