3
WinterWarm Small Insert
2000888
Specifications
WinterWarm Small Insert
EPA Emissions Rating .......................gph, catalytic 2.1*
Range of heat output* ................. 8,700 - 31,100 Btu/hr
Maximum heat output** ........................... 30,000 Btu/hr
Area heated*** ............................................ 1,000 sq. ft.
Size of wood splits .................................... 18” (460mm)
Fuel Capacity ........................................ 30lbs. (13.5kg)
Loading ..................................................................Front
Flue size ..................................................... 6” (150mm)
Fireplace Insert weight ......................... 285lbs. (130kg)
Primary Air Control ........................Manual/thermostatic
Secondary Air Control ............................Self-regulating
Glass panel ......................... High-temperature ceramic
Flue exit position ..................................................... Top
Blower rating ...............................110cfm. (115V, 60Hz)
*Under specific test conditions used during EPA emis-
sions standard testing.
**This value can vary depending on how the unit is
operated, and the type and moisture content of the fuel
used. Figure shown is based on maximum fuel con-
sumption obtained under laboratory conditions and on
average efficiencies.
***These values are based on operation in building-
code conforming homes under typical winter climate
conditions in New England. If your home is of nonstan-
dard construction (e.g. unusually well insulated, not in-
sulated, built under ground, etc.) or if you live in a more
severe or more temperate climate, these figures amy
not apply. Since so many variables affect performance,
consult your Vermont Castings’ Authorized Dealer to
determine realistic expectations for your home.
26" (660mm)
25" (650mm)
21
"
(535mm)
21" (535mm)
13" (330mm)
6"
(160mm)
6"
(165mm)
21
"
(535mm)
16" (420mm)
0888
WWsi
specifications
4/01
0888
Fig. 1 WinterWarm Small Insert dimensions.