CDA HCG450 Stove User Manual


 
Maintenance and cleaning
Do not use jet of steam for cleaning.
Instructions for use
002 LINGUE 28-09-2005 19:29 Pagina 28
Before any operation disconnect the appliance electrically. Wash the enamelled
parts with lukewarm water and detergent. Do not use abrasive products.
Wash the burner spreader frequently with boiling water and detergent being sure to
remove any deposits which could block the flame outlet. Rinse the stainless steel
parts well with water and dry them with a soft cloth.
To clean the hob use slightly damp sponges and wiping cloths: if too much water is
used it could penetrate the internal parts and damage electrical parts.
The grids of the hob can be washed in the dishwasher.
For persistent stains use normal non-abrasive detergents, specific products com-
monly available on the market or a little hot vinegar. Clean the glass hob with hot
water, avoiding the use of rough cloths.
Do not use stainless steel pads or acids for cleaning.
To prevent lighting difficulties, carefully clean the lighting spark
plugs regularly (ceramic and electrode).
Periodically, or if the knobs become difficult to turn, contact a
qualified engineer to lubricate the taps.
Contact a qualified engineer to deal with any other problems
which may arise during use.
IE
GB
Important. IN CASE OF BURNERS REMOVAL FOR CLEANING PURPO-
SES, WE RECOMMEND TO MAKE SURE THAT ALL PARTS ARE COR-
RECTLY POSITIONED BEFORE IGNITING THE BURNERS AGAIN.
NO
YES
25