Filter
Top Products
Instructions for installation
002 LINGUE 28-09-2005 19:29 Pagina 36
mm
IE
GB
• Position the special sealed gasket (provided) on the
edge of the hob making sure that the ends meet without
one lying on top of the other.
• Put the hob in the unit opening making sure that it is
centred.
• Fasten the hob to the unit with the fastening brackets.
The traction of the screws will be enough to cut the sea-
ling gasket so that the excess can easily be removed.
Warnings
If there is a hanging unit over the cooking hob it must
be at least 600 mm away from it.
In order to avoid excessive overheating, even if there
is no oven below, it is necessary to provide a separa-
ting space having at least the size of the embedment
hole.
85
mm
SEPARATOR
33