Filter
Top Products
5
Step 3. To hang the fan body in the
canopy, hold the fan body firmly and in-
sert the nylon ball into the canopy
opening. Check that no wires were
pinched. Rotate the fan body until the
slot in the nylon ball fits into the pin
opposite the canopy opening.
HANGING THE FAN
PIN
SLOT
BALL
CANOPY ELECTRICAL CONNECTIONS
Step 4. Attach the fan wires to the ceiling fixture outlet box
wiring by twisting the bare ends of the wires together and
then securing with a wire nut. Test that the connection is
secure by pulling on the wire nut. Connect in this order:
WIRE NUT
Electrical Connections
• GREEN leads from mounting plate and fan to GROUND
conductor of power source. Secure with wire nut.
• WHITE wire from fan to white NEUTRAL wire in ceil-
ing fixture outlet box. Secure with wire nut.
• BLACK power wire from fan to BLACK power wire in
ceiling outlet box. Secure with wire nut.
2 WHITE WIRES
2 BLACK WIRES
3 GREEN WIRES
METROPOLITAN
™
Step 5. Tuck the wires into the canopy
with the wire nuts pointed upwards, so
that the WHITE and BLACK wires are on
opposite sides of the canopy and all wires
are clear of the canopy opening.
Step 6. Install canopy hatch with the last
canopy screw and lock washer. To do this,
tilt the fan body away from the hatch
opening.
Tighten the screws firmly by hand only,
Step 7. Straighten the fan, then check
to ensure that there is no movement be-
tween the canopy and ceiling or Hang-Tru
ball and top support shaft.
CANOPY HATCH INSTALLATION
TILT THE
FAN TO
INSTALL
LAST
CANOPY
SCREW
CANOPY
SCREW
CANOPY
HATCH
LOCK
WASHER
Note: Write down the
Serial Number and the
model number for future
reference.