www.CasablancaFanCo.com
1.888.227.2178
17
M6006-01 • 02/12/16 • © Casablanca Fan Company
Troubleshooting
Fan doesn’t work
• Make sure the wall switch is on.
• Press a fan speed button (1-6).
• Check the circuit breaker to
ensure the power is turned on.
• Check the transmitter battery.
• Make sure that you have paired
the remote.
• Make sure the blades spin freely.
• Turn off power from the circuit
breaker, then loosen the canopy
and check all the connections
according to the wiring diagram
on page 10.
AUTHORIZED SERVICE CENTERS
For the most updated listing of Casablanca Authorized
Service Centers, visit www.CasablancaFanCo.com or
call toll free 1-888-227-2178.
Excessive wobbling
• Tighten all of the blade and
blade iron screws until they
are snug.
• Turn the power off, support
the fan carefully, and check
that the hanger ball is
properly seated.
• Use the provided balancing
kit and instructions to balance
the fan.
Noisy Operation
• Tighten the blade and blade
iron screws until they are snug.
• Check to see if any of the
blades are cracked. If so, replace
all of the blades.
Remote doesn’t work
• Install a fresh battery in the wall
control.
• Make sure you have paired the
remote.