Filter
Top Products
www.CasablancaFanCo.com
1.888.227.2178
Operation, Maintenance & Cleaning
For cleaning the fan, use soft
brushes or cloths to prevent
scratching. Cleaning products
may damage the nishes.
To select fan speed press one of
the numbers on the Fan Speed
Dial. To calibrate the fan speed,
run the fan on “6” for 90 seconds
after each AC power reset. The
LED light ashes to indicate a
signal has been sent to the fan.
To reverse the air ow direction,
press the Reverse button while
fan is running. Press Light button
to turn lights off/on. To dim the
lights, press the light button for
more than one second. Light will
cycle from brightest to dimmest.
Release the light button when
desired brightness is achieved.
To change the battery, remove
the battery door. Remove battery
and replace with A23 or MN21
alkaline battery. Please observe
proper polarity placement.
ON
D
ON ECE
1234
SET
Light
Off
Fan
Speed
Dial
Reverse
LED
(Low)
(High)
(If light kit is
installed)
+
_
M6006-01 • 02/12/16 • © Casablanca Fan Company
16