Filter
Top Products
www.CasablancaFanCo.com
1.888.227.2178
M6006-01 • 02/12/16 • © Casablanca Fan Company
15
Remote Control
Remove battery door. Change
the dip switch settings if the
frequency matches a previously
installed remote transmitter. Install
A23 or MN21 alkaline battery in
the proper polarity and replace the
battery door. To pair the remote,
hold down the Set button for 5
seconds. Pairing is complete when
LED button ashes twice.
To install the transmitter cradle,
hand-tighten the provided
screws to mount the cradle to
the wall.
If a light kit is installed on your
fan, choose the light bulb mode
by moving the toggle switch.
Move the switch towards the “D”
for CFL bulbs and toward “ON”
for standard bulbs. Replace the
battery door.
ON
D
ON
D
ON ECE
1234
SET
Battery
Set
ON
D
ON ECE
1234
ECEON
1234
SET
Battery
Door
(If a light kit is installed)
Once the power
is turned on, the
remote must be
paired within 60
seconds. Pairing
is only required
once after initial
installation.
ON
Turn Power