www.CasablancaFanCo.com
1.888.227.2178
Remote Control
ON
Turn Power
To access the battery compartment, remove
the small Phillips head screw that secures the
battery door to the transmitter assembly. The
battery should be installed with the positive
(+) side up. Replace with a CR2032 battery
when necessary.
See next page for fan
operation instructions.
CONGRATULATIONS!
YOU’RE DONE!
The remote transmitter is already paired
to the receiver and ready to use.
Note: If you would like to operate
multiple fans or multiple remotes,
or if your remote is not working,
please see the Troubleshooting
section at the end of this manual.
Phillips
Head
Screw
Battery
Door
17
M8527-01 • 04/16/15 • © 2015 Casablanca Fan Company