Filter
Top Products
8
COMPLETING INSTALLATION
Step 14. Hold the switch housing up to
the fan and connect the motor plug to
the switch housing socket. The connec-
tor is keyed to ensure correct installation.
PREPARATION
CONNECTING THE SWITCH HOUSING ASSEMBLY
Step 13. Locate the switch housing/cap
assembly and remove the two 8-32 X
3
/8″
screws holding the cap onto the switch
housing.
SWITCH HOUSING
MOUNT SCREW
(REMOVED IN STEP 8)
5-32 X
9
/32″
(2)
SWITCH
HOUSING
CONNECTOR
(SOCKET)
MOTOR
CONNECTOR
(PLUG)
SWITCH HOUSING
AND
CAP
ASSEMBLY
CAP
REVERSE
SWITCH
SWITCH
HOUSING
SWITCH HOUSING
CONNECTOR
(SOCKET)
PULL CHAIN
SWITCH
CAP SCREW
8-32 X
3
/8″
(2)
Note: Save these two screws–they
will be used in Step 18!
Note: Do not force the connectors–
check that they are orientated so
the keying will match!
CAPISTRANO
Casablanca