Open as PDF
PROGRAMMABLE DIGITAL THERMOSTAT
-q Liquid Crystal Display
with Thermoglew TM Backlight
[_ Up/Down Buttons
F4] Override Button
Fq Heat or Cool Indicator
Heat = Red, Cool = Green
[_Ternperature Sensor Bubble
FRONT PANEL 1
QUICK START Set the clock and go 2
BASIC OPERATION 2
PROGRAMMING Occupied and
Unoccupied Periods 3
ADVANCED SETUP 4
ABOUT ADVANCED FEATURES
AND OPERATION 5
IMPORTANT: Follow Installation Instructionsbefore proceeding.
CAUTION: SETTHERMOSTATTO MODE "OFF"
PRIOR TO CHANGING SETTINGSIN SETUPOR
RESTORING FACTORY DEFAULTS,
3 Occupied periods and 1 Unoccupied period
Large, Easy To Read Display
Thermoglow TM Backlight
Remote Sensor Ready
Dry Contact Equipped
Energy Saving Smart Fan
Fan Purge, IAQ Feature
Meets California Title 24
I _,I |1|11A Sta 
__ "U U Pm ISt°p IIII
[_ sled123 o ,COOL,
un_ _ Override
[_ Outside 
_[_ HEAT _- 
E_ Mode Indicators
Selects the operation mode of the equipment.
HEAT -- indicates the heat mode.
COOL -- indicates the air conditioning mode.
AUTO -- indicates the system will automatically
changeover between the heat and cool
modes as the temperature varies.
OFF -- indicates the entire system is turned off.
PROGRAM ON -- indicates the stored program is
enabled to run. See page 2.
r_ Clock with of the Week
Indicates the current time and day. This clock is also
used to program the timer periods. See page 2.
['3-] Room Temperature Display
Indicates the current room temperature.
[4-] Desired Set Temperature
Indicates desired room temperature(s). See page 2.
 Override Indication
Indicates the current program is currently being over-
ridden for up to 4 hours. See pages 2 and 5.
E_] Occupied or Unoccupied
Indicates the program number: Occupied 1,2, 3, or
Unoccupied. See pages 3 and 4.
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Catalog No 535-328 Printed in U.SA Form OM53-3 Pg 1 11-04 Replaces: New