Cal Flame LTR20091082 Burner User Manual


 
10
Installation / Assembly
Cal Flame Side Burners
LTR20091082, Rev. A
www.calspas.com
Installing Side Burner with a Grill
If you are installing a side burner in conjunction with a gas grill, install
it in the following manner.
Assemble a 3/8” pipe nipple to the 3/8” pipe tee using Teon tape 1.
or pipe sealant. Use only sealant that is approved for use on LP
gas.
Install the pipe tee assembly to the grill intake pipe. Tighten as-2.
sembly and align the branch opening of the tee with the hole of
the cabinet.
Connect the exible hose (male end) to the pipe tee.3.
Install and secure the side burner into the island by simply setting 4.
it in place.
Connect the female end of the exible hose to the side burner 5.
intake pipe.
Connect gas supply to the grill.6.
Check for gas leaks using soap water solution.7.