Filter
Top Products
ROOM AIR BLOWER OPERATION
Your heater is equipped with a room air blower. For operation and wiring see figure 14.
For your convenience your heater is equipped with a rheostat with which you are able to select
air flow. The auto and manual switch will allow you to select the position at which thermostat
will function.
Auto-position: After heater has warmed up and Auto-Manual switch is placed in “Auto”
position and rheostat is in desired position, then fan will automatically come on. When stove
cools off fan will automatically shut-off.
Manual position: You must turn room air blower on and off.
NOTE: Plug power cord into a 115V AC outlet. Set switch to “Manual” and rheostat to
“High” position to ensure motor operates properly. Route cord to prevent damage to
cord insulation from heat and sharp objects. Keep cord out of the way of traffic to
prevent damage caused by tripping, etc.
Figure 14
Page 22