Bryant T6-PRH-A Thermostat User Manual


 
2
TABLE OF CONTENTS
PAGE
SAFETY CONSIDERATIONS 2....................................
INTRODUCTION 3..............................................
INSTALLATION CONSIDERATIONS 4..............................
INSTALLATION 8...............................................
SYSTEM START-- UP AND CHECKOUT 43..........................
OPERATIONAL INFORMATION 54................................
TROUBLESHOOTING 57.........................................
WIRING DIAGRAMS 61..........................................
THERMIDISTAT CONTROL CONFIGURATION RECORD 81...........
SAFETY CONSIDERATIONS
Read and follow manufacturer instructions carefully. Follow all local electrical
codes during installation. All wiring must conform to local and national electrical
codes. Improper wiring or installation may damage Thermidistat Control.
Recognize safety information. This is the safety--alert symbol
. When you see
this symbol on the equipment and in the instruction manual, be alert to the
potential for personal injury.
Understand the signal words DANGER, WARNING,andCAUTION.These
words are used w ith th e safety--alert symbol. DANGER identifies the m ost
serious hazards which will result in severe personal injury or death. WARNING
signifies a hazard which could result i n personal injury or death. CAUTION is
used to identify unsafe practices which may result in minor personal injury or
product and property damage. NOTE is used to highlight suggestions which will
result in enhanced installation, reliability, or operation.