Brother XL-5060 Sewing Machine User Manual


 
41
No No No No
No
No
No
No No
No No
No
No
FABRIC DOES
NOT FEED
PROPERLY
MACHINE IS
NOISY OR SLOW
No
NEEDLE
BREAKS
MACHINE DOES
NOT START
Power supply
plug is removed
from outlet.
Lint is clinging to
the bottom of the
needle plate.
Stitch length
dial is set at no
feeding.
Needle is not
correctly inserted.
The combination
of needle size/
thread size/fabric
is incorrect.
Inferior needle is
used.
Main power
switch is turned
off.
Insufficient oiling.
The combination
of needle size/
thread size/fabric
is incorrect.
Foot controller is
not used correctly.
Inferior needle is
used.
Fabric is pulled
excessively. Let the
feed dogs move the
fabric. Do not pull
the fabric.
Thread is tangled.
CONTACT YOUR LOCAL SERVICE CENTER
No
Feed dogs are
lowered.
The bobbin
winding shaft is
slid toward the
bobbin presser.
Page 14 Page 8 Page 39 Page 6
Page 24 Page 8 Page 38 Page 7
Page 8 Page 24 Page 7
Page 18 Page 15
Page 14
XL5000us.book Page 41 Tuesday, November 11, 2003 9:25 AM