Filter
Top Products
15
1
Stretch Stitching
■ 35 Stitches
Selecting a Stretch Stitch
Setting the stitch length dial to “ ” or “ ”
changes the selected pattern to a stretch stitch.
■ 25 Stitches
Selecting a Stretch Stitch
Setting the stitch length dial to “ ” changes the
selected pattern to a stretch stitch.
Stitch Width Dial
The numbers marked on the dial represent the stitch
width. THE HIGHER THE NUMBER, THE WIDER
THE STITCH.
1 Stitch width dial
Note
● When the Straight or Triple Stretch Stitch is
selected, the needle position can be
changed from left to right by adjusting the
stitch width dial.
.
Reverse Sewing Lever
You can use reverse sewing for back tacking and
reinforcing seams.
To sew in reverse, push the reverse sewing lever in
as far as possible and hold it in that position while
you lightly push the foot controller. To sew forward,
release the reverse sewing lever. The machine will
then sew forward.
1 Reverse sewing lever
1
1
XL2600.book Page 15 Thursday, November 4, 2004 9:46 PM