Filter
Top Products
66
UTILITY STITCHES ———————————————————————————————————————————————————————————————————————————————————————————————————
——
REINFORCEMENT STITCHING
Reinforce points that will be subject to strain, such as sleeve holes, inseams and pocket corners.
*Auto Rfc.: Automatic Reinforcement **Select a stitch width of 5.0 mm (3/16 inch) or less.
Triple stretch stitching
Use triple stretch stitching to reinforce sleeve holes
and inseams.
a
Attach zigzag foot “J”.
b
Select stitch .
c
Start sewing.
• For details, refer to “Starting to sew”
(page 39).
Bar tack stitching
Bar tacks are used to reinforce points subject to
strain, such as pocket corners and openings.
As an example, the procedure for sewing bar tacks at
pocket corners is described below.
a
Determine the desired length of the bar tack.
Set the button guide plate on buttonhole foot
“A” to the desired length. (The distance
between the markings on the presser foot scale
is 5 mm (3/16 inch).)
a Presser foot scale
b Length of bar tack
c 5 mm (3/16 inch)
• A bar tack with a maximum length of about
28 mm (1-1/8 inches) can be sewn.
b
Attach buttonhole foot “A”.
c
Select stitch .
Stitch Name
Pattern
Presser Foot
Pattern No.
Application
Stitch Width
[mm (inch.)]
Stitch Length
[mm (inch.)]
Twin Needle
Walking Foot
Reverse
(
Rev.
)
/
Reinforcement
(
Rfc.
)
Stitching
100 stitches
model
90 stitches
model
80 stitches
model
70 stitches
model
60 stitches
model
50 stitches
model
40 stitches
model
Auto
Manual
Auto
Manual
Triple
stretch stitch
J 02020202020202
Attaching sleeves, sew-
ing inseams, sewing
stretch fabrics and deco-
rative stitching
0.0 (0)
0.0-7.0
(0-1/4)
2.5 (3/32)
1.5-4.0
(1/16-3/16)
**
Yes
( J )
No Rfc.
Bar tack
stitch
A 42424236363430
Reinforcing openings
and areas where the
seam easily comes loose
2.0 (1/16)
1.0-3.0
(1/16-1/8)
0.4 (1/64)
0.3-1.0
(1/64-1/16)
No No
*
Auto
Rfc.
● Be sure to turn off the main power before replacing the presser foot. Otherwise, injuries may occur if
the foot controller or (start/stop button) is accidentally pressed and the machine starts sewing.
CAUTION
1
2
3