Brother V61 Sewing Machine User Manual


 
59
3
SEWING STRETCH FABRICS AND ELASTIC TAPE
Stretch fabrics can be sewn and elastic tape can be attached.
*Select a stitch width of 5.0 mm (3/16 inch) or less.
Observe the corresponding precautions when performing each of the following stitching operations.
Stretch stitching
a
Attach zigzag foot “J”.
b
Select stitch .
c
Sew the fabric without stretching it.
Elastic attaching
When elastic tape is attached to the cuff or waist of a
piece of clothing, the finished dimensions will be that
of the stretched elastic tape. Therefore, it is necessary
that a suitable length of the elastic tape be used.
a
Pin the elastic tape to the wrong side of the
fabric.
Pin the elastic tape to the fabric at a few points
to make sure that the tape is uniformly
positioned on the fabric.
a Elastic tape
b Pin
b
Attach zigzag foot “J”.
c
Select a stitch.
Stitch Name
Pattern
Presser Foot
Pattern No.
Application
Stitch Width
[mm (inch.)]
Stitch Length
[mm (inch.)]
Twin Needle
Walking Foot
Reverse
(
Rev.
)
/
Reinforcement
(
Rfc.
)
Stitching
100 stitches
mode
90 stitches
mode
80 stitches
mode
70 stitches
model
60 stitches
model
50 stitches
model
40 stitches
model
Auto
Manual
Auto
Manual
Stretch stitch J 03030303030303
Sewing stretch fabrics
and decorative stitching
1.0 (1/16)
1.0–3.0
(1/16–1/8)
2.5 (3/32)
1.0–4.0
(1/16–3/16)
Yes
( J )
No Rfc.
3-point
zigzag stitch
J 05050505050505
Overcasting on medium
weight or stretch fabrics,
attaching elastic, darn-
ing, etc.
5.0 (3/16)
1.5–7.0
(1/16–1/4)
1.0 (1/16)
0.2–4.0
(1/64–3/16)
*
Yes
( J )
No Rfc.
Elastic-
attaching
stitch
J212121----
Attaching elastic to
stretch fabrics
4.0 (3/16)
0.0-7.0
(0-1/4)
1.0 (1/16)
0.2-4.0
(1/64-3/16)
*
Yes
( J )
No Rfc.
Be sure to turn off the main power before replacing the presser foot. Otherwise, injuries may occur if
the foot controller or (start/stop button) is accidentally pressed and the machine starts sewing.
CAUTION
1
2