Brother V61 Sewing Machine User Manual


 
53
3
f
Position the fabric with the front end of the
buttonhole mark aligned with the red marks
on the sides of the buttonhole foot, and then
lower the presser foot lever.
a Mark on fabric
b Red marks on buttonhole foot
When lowering the presser foot, do not push
in the front of the presser foot, otherwise the
buttonhole will not be sewn with the correct
size.
a Do not reduce the gap.
g
Pull down the buttonhole lever as far as
possible.
a Buttonhole lever
The buttonhole lever is positioned behind the
bracket on the buttonhole foot.
a Buttonhole lever
b Bracket
h
Gently hold the end of the upper thread in
your left hand, and then start sewing.
Note
If thick seams are being sewn and the fabric
does not feed, sew with the coarser (longer)
stitch.
X Once sewing is completed, the
machine automatically sews
reinforcement stitches, then stops.
i
Raise the needle and the presser foot lever,
remove the fabric, and cut the thread.
j
Raise the buttonhole lever to its original
position.
A
1
2
2