Brother ULT2001 Sewing Machine User Manual


 
5-2 Embroidery
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?
!
9 —
CONTENTS
Index
About Floppy Disks
If your machine did not come furnished with a built-in floppy disk drive, you can receive an
upgrade service for your machine, so that it can use floppy disks at your authorized dealer.
If floppy disks containing data other than that created for this machine, or patterns saved
from your machine, are inserted into your machine, the machine may not operate correctly.
Only insert or remove floppy disks when is displayed, or when prompted to
change disks by the screen (see page 5-18).
Data saved on floppy disks may be lost or sometimes corrupted. Always make a backup of
any important data saved on floppy disks.
If the head of the floppy disk becomes dirty, the data can not be read normally. Use a
cleaning disk for floppy disks regularly to avoid problems (see page 8-4). Be sure to follow
the drive cleaning instructions on the package.
Do not leave floppy disks where bits of thread or lint are likely to collect. These things may
damage the disks. Put the disks in the hard case when storing.
Do not leave floppy disks near the TV, magnets, or other objects with magnetic properties.
Otherwise, the data on the disk may become unreadable.
Floppy disks are 2HD type. Be sure to use formatted disks.
Move the write protect switch on the floppy disk to the unprotected position before using
the disk.
Only use letters and numbers for the file names of the embroidery data. Using special
symbols may prevent the data from being saved.