Filter
Top Products
S-7200A
7. USING THE CONTROL BOX PANEL (BASIC OPERATIONS)
25
<Start and end backtack sewing method>
1
Press the power switch (1) to turn on the power.
2
1. Press the start backtack key (2) so that the start backtack indicator (3)
illuminates.
2. Press the end backtack key (4) so that the end backtack indicator (5)
illuminates.
3
Start backtacking is carried out. After it has finished, normal sewing
continues for as long as the treadle remains depressed.
NOTE:
If the treadle is returned to the neutral position, the sewing machine will
continue operating until the set number of start backtack stitches has
been sewn.
4
End backtacking is carried out. After it has finished, the thread is trimmed
automatically and the sewing machine stops in the needle up position.
NOTE:
If the treadle is depressed backward before sewing of the set number of
start backtack stitches is complete, end backtacking will not be carried
out.
2160M
2159M
3142M
3141M