Filter
Top Products
S-7200A
4. INSTALLATION
10
7. Machine head
(1) Hinges [2 pcs]
(2) Machine head
(3) Head rest
NOTE:
Tap the head rest (3) securely into
the table hole. If the head rest (3) is
not pushed in as far as it will go, the
machine head will not be sufficiently
stable when it is tilted back.
8. Operation panel
(1) Operation panel
(2) Screws [2 pcs]
(Use for tightening rear cover)
9. Sticker (Remove)
(1) Sticker
10. Cotton stand
(1) Cotton stand
NOTE:
Securely tighten the nut (4) so that
the two rubber cushions (2) and the
washer (3) are securely clamped and
so that the cotton stand (1) does not
move.
2095M
2096M
2097M
2098M