Filter
Top Products
GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
18
LCD (Liquid Crystal Display) Operation
Selected stitch, pattern settings and messages are displayed on the LCD (liquid crystal display) on the front
of the sewing machine.
Viewing the LCD
When the power is turned on, the LCD comes on, and the following screen is displayed.
The screen is changed using the keys below the screen, and operations performed by directly touching the icons
on the LCD screen.
■ Utility stitch selection screen
a Selected stitch
b Presser foot to be used
c Stitches
d Stitch settings and twin needle sewing
e Stitch width (mm)
f Stitch length (mm)
g Thread tension
h Number of the selected stitch
i Number of stitches contained in the selected stitch
type
j Horizontal mirror image
k Automatic thread cutting
l Automatic reverse/reinforcement
m Single/twin needle sewing and needle stop position
■ Stitch type selection screen
Press (Utility stitch key) to display the screen for selecting the stitch type. The details are explained in
“Selecting stitching” (page 49).
Memo
z A different screen is displayed when the embroidery unit is attached.
z Refer to “Error messages” (page 187) for messages displayed on the LCD.
z Depending on the model of sewing machine, an animation may be displayed when the power is turned
on. When an animation is displayed, the screen above will be displayed if you touch the LCD with
your finger.
a
b
c
d
e
f
j
h
i
g
klm