Filter
Top Products
SEWING BASICS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
52
e
Select the stitch type.
When selecting a decorative stitch
X The screen containing the various stitches in
the selected stitch type appears.
• To select a different stitch type, press
(Back key).
f
Select a stitch.
(Previous page key) displays the previous
page, and (Next page key) displays the
next page.
Memo
z When touching the screen with your finger
is difficult, use the included touch pen.
a Selects decorative stitch
b Sets width and length
c Selects single stitch sewing
d Selects repeat sewing
e Makes horizontal mirror image
f Deletes a selected pattern
g Used for checking combined pattern
h Activates automatic thread cutting
i Activates automatic reverse/reinforcement stitch
• To select a different stitch, press to
remove the selected pattern.
g
g
If necessary, specify the settings for automatic
reverse/reinforcement stitching and adjust the
stitch length, etc.
• For details on sewing with each of the utility
stitches, refer to Chapter3, "UTILITY
STITCHES" which begins from page 72.
Note
z When a stitch is selected, the icon for the
presser foot that should be used appears on
the screen. Check that the correct presser
foot is attached before starting to sew. If the
wrong presser foot is installed, turn off the
sewing machine, attach the correct presser
foot, and then select the desired stitch again.
Memo
z For details on setting automatic reverse/
reinforcement stitching etc., refer to "Useful
Functions" (page 64).
z For details on adjusting the stitch width,
stitch length and thread tension, refer to
"Setting the Stitch" (page 61).
■ Selecting utility stitches
a
a
Follow steps a to c in "Selecting stitching"
(page 51).
b
Select a stitch.
Memo
z The utility stitch selection screen appears
when you turn on the machine.
Example: When
11
is selected:
a
b
cd
e
f
g
h
i