Brother 884-639 Sewing Machine User Manual


 
21
Invisible Zipper Foot
Attach invisible zipper foot.1
Align zipper with fabric. Mark 2
the base of the opening
approximately 2 cm above the
end of the zipper.
Baste the zipper position.3
Separate the seam allowance.4
With the zipper mounted, baste 5
just the seam margin on one
side of the zipper.
Close the zipper and baste the 6
other side of the zipper.
Remove the basting at the 7
zipper position.
Fit the zipper teeth into the 8
presser foot groove, guide them
to prevent them from falling
over, and sew to the base of the
opening.
When sewing with the teeth to
the right, the left side of the foot
should line up with the left teeth
of the zipper.
Baste
2 cm
Base of
Opening
Slide
Teeth
Basting
Basting
1/4” Foot
Sewing machine settings:
Stitch length = 2 - 2.5 mm
Sew a consistent seam •
allowance (1/4”, 6.4 mm) when
piecing together a quilt.
Use guides (mark) to begin, •
end, or pivot 1/4” from edge of
fabric.
Accurately top stitch 1/8” from •
seam.
Seam allowance
(1/4”, 6.4 mm)
End of
stitching
Align this
mark with
edge of
fabric
Align this
mark with
edge of
fabric
Beginning
of
stitching
Top of fabric
Seam
(1/8”, 3.2 mm)