Brother 884-639 Sewing Machine User Manual


 
14
Threading (2)
1
2
6
7
8
9
0
A
3
4
5
Long
Groove
Scarf
(depression on
needle shaft)
Thread
Needle Hole
1
7
2
3
5
6
4
7
8
9
0
A
Make sure thread take-up lever
(
7
) is in highest position and
presser foot is up.
When using polyester thread or thread that
tangles or breaks, run the thread through
all three holes of the thread guide.
If the thread is still tangles or breaks,
run the thread through the holes
backwards as shown in diagram.
CAUTION
Please turn off the power to the machine before using the automatic needle threader. Accidentally stepping on the foot controller during this operation could cause bodily injury or damage to the machine.
CAUTION
Turn off the power to the machine before using the
automatic needle threader. Otherwise, it may cause
injuries when you unintentionally press down on the
foot controller.
Upper Threading
Thread tension may not be adjusted
adequately unless the thread runs
correctly through the take-up spring.
Thread take-up spring