Brother 484C Sewing Machine User Manual


 
8. ELECTRIC MECHANISM
KE-430B, 430C series
154
Switch
Possible
setting range
Units
Initial
value
Explanation
10
<KE-430*, 431*, 432*, 433B, 434*, 435*, 484C>
Changes the feed timing for the second stitch at the
sewing start.
memo-3A 1 - 20
7.5
1
<BE-438*>
Changes the feed timing for the second stitch at the
sewing start.
10
<KE-430*, 431*, 432*, 433B, 434*, 435*, 484C>
Changes the feed timing for the first stitch at the sewing
start.
memo-3b 1 - 20
7.5
1
<BE-438*>
Changes the feed timing for the first stitch at the sewing
start.
memo-3c 0 - 99 Stitch 0
Sets the number of stitches for which the feed timing
(memo-33 setting) is enabled.
0: Enabled for all stitches
1 - 99: Enabled for the specified number of stitches from
the sewing start
memo-3d - - - -
memo-3E - - - -
memo-3F - - - -
memo-40 1 - 5 - 4
<KE-434*, 435*, 484C>
Changes the test feeding speed (with no material).
1 (Fast)  5 (Slow)
memo-41 1 - 99 x10ms 10
<KE-435*>
Changes the standby time after the stepping foot is
raised.
0 - 10 - 0
<Solenoid specifications>
The work clamp operating mode can be changed.
(When set to “0”, the mode is selected according to the
settings for DIP switches A-1 and A-2.)
Refer to “8-8. Setting the work clamp mode” for details
of the available modes.
0 <Pneumatic specifications>
memo-42
0 - 13 -
5 <Inner clamping device specifications>
memo-43 1 - 3 - 3
<KE-434*, 435*, 484C>
Changes the allowable speed/sewing pitch.
1 (Fast)  3 (Standard)
0
<KE-434*, 435*, 484C>
Changes the path taken when moving from the machine
home position to the start position.
0: Across inside of work clamp, 1: Top-left, 2:
Bottom-left, 3: Bottom-right
memo-44 0 - 3 -
1
<Inner clamping device specifications>
1: Top-left, 2: Bottom-left, 3: Bottom-right
memo-45
-
memo-4c
- - - -
memo-4d 0 - 10 x100ms 0
<KE-484C>
Changes the work clamp lift timing after sewing is
finished.
memo-4E 2 - 9
7.5
5
<KE-484C>
Tension release ON timing after thread trimming.
2 (Fast) 5 (Standard) 9 (Slow)
memo-4F 14 - 19
7.5
14
<KE-484C>
Thread trimming timing
14 (Standard) 19 (Slow)