BRK electronic SC1000BN Smoke Alarm User Manual


 
6
Recommended Placement
When installing on the wall, the smoke
alarm should be placed between 4 inches
(102 mm) and 12 inches (305 mm) from
the wall/ceiling line.
When installing on the ceiling, place the
alarm as close to the center as possible.
In either case, install at least 4 inches
(102 mm) from where the wall and ceiling
meet. See “Avoiding Dead Air Spaces”
on page 7 for more information.
N
OTE:
For any location, make sure no door or other
obstruction could keep carbon monoxide or
smoke from reaching the alarm.
WHERE NOT TO INSTALL
THIS ALARM
Do NOT locate this smoke/CO alarm:
In garages, kitchens, furnace rooms, crawl
spaces and unfinished attics. Avoid
extremely dusty, dirty or greasy areas.
Closer than 20 feet (6 meters) from a fur-
nace or other fuel burning heat source, or
fuel burning appliances like a water heater.
Where combustion particles (formed when
something burns) are produced. Avoid
poorly ventilated kitchens, garages, and
furnace rooms. Keep this smoke/CO alarm
at least 20 feet (6 meters) from sources of
combustion particles (stove, vehicle,
furnace) whenever possible.
Within 5 feet of any cooking appliance.
In air streams near kitchens. Air currents
can draw cooking smoke into the smoke
sensor and cause unwanted alarms.
In extremely humid areas. This alarm should
be at least 10 feet (3 meters) from a shower,
sauna, humidifier, vaporizer, dishwasher,
laundry room, utility room, or other source
of high humidity.
In direct sunlight.
In turbulent air, like near ceiling fans or open
windows. Blowing air may prevent CO or
smoke from reaching the sensors.
Continued on next page...