Filter
Top Products
Step 3
Carefully install replacement E-Unit(s) into position by placing bottom in first and tilting it in sideways to the top.
When repositioned correctly, the E-Unit(s) outlets face the interior and power switch should face the front.
Reinstall the E-Unit bracket assemblies (make sure that the top flange of the E-unit is aligned with the slot in the
bracket assembly) and tighten screws securely.
Plug in the E-Unit power cord(s) into the bottom outlet(s) of the timer assembly (located underneath bottom
shelf).
Press E-Unit power cord(s) into the two wire clips located on the side panel, bottom.
Do not use the rear, bottom wire clip.
Installation is now complete and ready for use.
bottom shelf