Filter
Top Products
Step 4
Carefully install replacement E-Unit(s) into position by placing bottom in first and tilting in sideways to the top.
When repositioned correctly, the E-Unit(s) outlets face the interior and power switch should be visible from rear
panel cutout.
Reinstall the E-Unit bracket assemblies (make sure that the top flange of the E-unit is aligned with the slot in the
bracket assembly) and tighten screws securely.
Plug in the E-Units power cord(s) into the bottom outlet(s) of the timer assembly.
Press E-Unit power cord(s) into the single wire clip located at the rear/bottom of the cart only.
Fold the power cords into a 's' pattern, flat on the bottom surface.
clip