Filter
Top Products
unilite+ SpecificationsHow To Assemble: unilite+
Maximum Power 200W
Lamp (230V)
BW3391
200W Compact Fluorescent
(6400K)
Lamp (117V)
BW3396
200W Compact Fluorescent
(6400K)
Supply Voltage
220-240V 50/60Hz (BW3390)
110-130V 50/60Hz (BW3395)
Fuse 3.15A (F) 20mm HRC
Dimensions
(including bracket & canopy)
508mm - 20” (h)
508mm - 20” (w)
520mm - 20.5” (d)
Weight 2.4Kg / 5.29lbs
PERFORMANCE Illuminance (Lux)
@1m @2m @3m
without diffuser 2700 700 330
with diffuser 1250 330 150
www.bowens.co.uk 76 www.bowens.co.uk
STEP 1 - Firstly secure the
unilite to your stand or
support system and put the
canopy over the head as
shown above.
STEP 2 - To attach the
canopy to unilite use the
rods provided. To secure
the rods first insert through
corner tabs as detailed in
the picture above.
STEP 3 - Next, ensure that
the rods are inserted
through the corner tabs and
are secured inside the unit
as pictured above.
STEP 4 - Repeat steps 2 &
3 for all four rods until your
unilite appears the same as
the picture shown above.
STEP 5 - Next hold on to a
corner tab and the rod and
pull the corner tab over the
rod. Repeat for all four of
the corners.
STEP 6 - Once all four
corner tabs are secured
over the rods your unilite
should appear as shown in
the picture above.
STEP 7 - Next, gently screw
the lamp into the unilite
making sure to hold onto
the base of the lamp and
not the glass.
STEP 8 - Once your
canopy and lamp have
been assembled your unilite
should appear as shown
above.
STEP 9 - For additional
lighting control a fabric
diffuser has been included
to soften light output. To
use simply attach using the
velcro corners to secure to
canopy.