Filter
Top Products
How To Assemble: unilite unilite Specifications
STEP 1 - Firstly secure the
unilite to your stand or
support system and put the
canopy over the head as
shown above.
STEP 2 - To attach the
canopy to unilite use the
rods provided. To secure
the rods first insert through
corner tabs as detailed in
the picture above.
STEP 3 - Next, ensure that
the rods are inserted
through the retaining loops
inside canopy while making
sure the rods are secure
inside the unit.
STEP 4 - Repeat steps 2 &
3 for all four rods until your
unilite appears the same as
the picture shown above.
STEP 5 - Next hold on to a
corner tab and the rod and
pull the corner tab over the
rod. Repeat for three of the
corners.
STEP 7 - Next, loop velcro
over the tab and pull until
the canopy is secure over
the rod.
STEP 8 - Once your canopy
is in place, gently screw the
lamp into the unilite making
sure to hold onto the base
of the lamp and not the
glass.
STEP 6 - For the final
corner tab a strip of velcro
has been provided to allow
for easy assembly. Simply
attach as shown above.
STEP 9 - For additional
lighting control a fabric
diffuser has been included
to soften light output. To
use simply attach using the
velcro corners to secure to
canopy.
Maximum Power 100W
Lamp (230V)
BW3377
100W Compact Fluorescent
(6400K)
Lamp (117V)
BW3372
100W Compact Fluorescent
(6400K)
Supply Voltage
220-240V 50/60Hz (BW3370)
110-130V 50/60Hz (BW3375)
Fuse 3.15A (F) 20mm HRC
Dimensions
(including bracket & canopy)
460mm - 18” (h)
460mm - 18” (w)
340mm - 13.5” (d)
Weight 1.45Kg / 3.2lb
PERFORMANCE Illuminance (Lux)
@1m @2m @3m
without diffuser 1600 450 200
with diffuser 900 220 95
www.bowens.co.uk 54 www.bowens.co.uk