Filter
Top Products
Contents
Safety Notes
Operation
General Features
Introduction
Dear Valued Customer,
Welcome to the world-wide family of Bowens equipment users, and congratulations on selecting
the unilite. The unilite has been designed to the same high standards that has become
synonymous with the Bowens brand. The unilite is a simple, easy to use continuous light source
that is ideal for any photographic or video studio. For details of all related products, please contact
your local distriubutor; a list of which can be found at www.bowens.co.uk
In order to obain the full benefit from your purchase, please take a few moments to familiarise
yourself with this user guide.
· The unilite must not be used in an environment where moisture or flammable vapour is likely to
come into contact with the unit. A fire hazard exists if flammable materials are placed in close
proximity to the lamp when in use.
· Do not obstruct the airflow around the unit and keep all vents clear at all times.
· Disconnect from mains and allow to cool before fitting/removing acessories or changing
fuse/lamp. Never replace the fuse with a different type or rating. A spare fuse is contained in the
fuse holder.
· Avoid placing cables where they can be tripped over. Protect from heavy, sharp or hot objects.
· Damaged cables must be replaced immediately.
· A fire hazard exists if lamps other than those specified are used.
Select a stand or system to support the weight and dimensions to ensure stable operation of the
unit. Ensure that the mounting bracket screw is fully tightened. The angle of the head may be set
using the locking handle, always support the unit before releasing the handle and never force
adjustment without releasing the handle.
Use the mains lead supplied by your Bowens dealer to connect to a suitable mains supply -
220/240V 50/60Hz or 110/130V 50/60Hz.
Note: light output will improve after the lamp has been switched on for a few minutes.
The Bowens unilite is a continuous light source employing a lightweight reflective canopy. The unit
is supplied with a daylight 6400K lamp suitable for video studios or digital photography. The light
output from the Uni-Lite can be softened when required using the supplied fabric diffuser.
Features Include:
· 100W compact fluorescent lamp, equivalent to a 500W incandescent lamp.
· Adjustable mounting bracket to fit 16mm spigot for stand or
overhead mounting.
Description Page
Introduction 3
Safety Notes 3
Operation 3
General Features 3
How to Assemble: unilite 4
unilite Specifications 5
How to Assemble: unilite+ 6
unilitePlus+ Specifications 7
www.bowens.co.uk 32 www.bowens.co.uk