Filter
Top Products
FlexiDome
XF & DN
| Installation Manual
Bosch Security Systems | 2005-10 | V1.0
EN | 22
* Not in Day/Night version of camera.
** Only in Day/Night version of camera.
Note
If SENS UP is active, some noise or spots may appear in the picture. This
is normal camera behavior. SENS UP may cause some motion blur on
moving objects.
DEFSHUT 1/60 (1/50), 1/100,
1/120, 1/250,
1/500, 1/1000,
1/2000, 1/5000,
1/10K
Only available if SHUTTER is AES. The camera
tries to maintain the selected shutter speed as
long as the light level of the scene permits.
FIX SHUT 1/60 (1/50), 1/100,
1/120, 1/250,
1/500, 1/1000,
1/2000, 1/5000,
1/10K
Only available if SHUTTER is FIXED. Selects
shutter speed.
SENSUP OFF, 2x, 3x, …,10x Selects the factor by which the sensitivity of the
camera is increased.
GAIN AGC, FIXED •In AGC mode the camera automatically sets the
gain to the lowest possible value needed to
maintain a good picture
•In FIXED mode the gain is set at a predefined
not scene dependent value
MAXGAIN 0, 1, ... 26 Available in AGC mode only. Selects the
maximum value the gain can have during AGC
operation.
FIXGAIN 0, 1, ... 26 Available in FIXED gain operation only. Selects
the gain setting.
NIGHTSENSE*
OFF, FORCED,
AUTO
Nightsense™ extends the low-light performance
of the camera.
•In AUTO mode, the camera automatically inches
to monochrome in low-light conditions.
•In FORCED mode, the camera remains in high-
sensitivity monochrome operation.
DAY/
NIGHT**
Select submenu Select to access the day/night control menu
EXIT Return to the ALC menu