Filter
Top Products
7 en | Installing and Connecting VIP X1600 XFM4
F.01U.088.580 | V4.0 | 2009.03 Quick Installation Guide Bosch Security Systems
4.3 Alarm and Switch Connections
– Connect the alarm lines to terminals lN1 to IN4 and GND
on the 8-pin terminal block.
– Connect the relay lines to the two R1 terminals on the 8-
pin terminal block.
– Secure the terminal block onto the left-hand part of the
male multipoint connector.
!
CAUTION!
A maximum load of 30 V and 500 mA may be applied to the relay
contact.