Filter
Top Products
5 en | Installing and Connecting VIP X1600 XFM4
F.01U.088.580 | V4.0 | 2009.03 Quick Installation Guide Bosch Security Systems
4 Installing and Connecting
4.1 Installing Modules
– Insert the module into the guide rails of the first slot and
carefully push as far as it will go. If the first slot is already
equipped you can equip one of the other unused slots.
– First, remove the respective cover plate by unscrewing the
screw and bending the cover plate upwards.
– Insert the four screws provided in the bores on the module
and tighten.
– After a module has been removed, you must reseal the
empty slot with a cover to ensure correct air circulation.