8 en | Installation VIP X1 XF E
F.01U.269.645 | V2 | 2012.06 Quick Installation Guide Bosch Sicherheitssysteme GmbH
4.2 Mounting the frame
– Lift the plastic frame on one side of the housing and
carefully remove it from the unit.
– Screw the plastic frame in the required position together
with the wall-mounting panel.
– Check that the plastic frame is secure.
CAUTION!
The mounting location must be able to reliably hold the unit.
The load-bearing capacity must be adequate for four times the
weight of the unit.