Filter
Top Products
14 en | Connection VIP X1 XF E
F.01U.269.645 | V2 | 2012.06 Quick Installation Guide Bosch Sicherheitssysteme GmbH
5.5 Connecting the power supply
– Connect the power supply unit to the 12V DC socket. The
jack must fit a pin of 2 mm in diameter.
– Insert the power supply unit plug into a suitable socket.
IN
GND
12V DC
R
R
CTS
RTS
RXD
TXD
GND
GND
ACT
LINK
ETH
VIP X1 XF
CAUTION!
Only operate the VIP X1 XF E in combination with an LPS/NEC
Class 2 power supply unit that has limited output and meets
the following specifications: 12 V output voltage, 0.30 A max.