Filter
Top Products
18 en | Configuring the VG4-100 Series IP AutoDome AutoDome Modular Camera System
F01U028033 | 1.0 | 2006.08 VG4-100 Series User’s Manual Bosch Security Systems, Inc.
Fig. 6.2 Network Settings Page
7. Configure the settings on this page based on the addresses provided by your local net-
work administrator.
8. Click the Set button to save the settings.
9. Launch another instance of Microsoft Internet Explorer.
10. Type the original IP address followed by /reset (for example,
http://192.168.0.1/reset) in the address bar and click Go to restart the IP
AutoDome. Once you restart the IP AutoDome, use the new IP Address to access the Live-
page.
11. Disconnect the IP AutoDome Ethernet cable from the dedicated network switch and
reconnect the Ethernet cable to the local area network (LAN).
i
NOTICE! Click on the Help on this page? link if you need more information.