Filter
Top Products
56 en | Recording Camera Browser Interface
AM18-Q0611 | v5.50 | 2012.03 Software manual Bosch Security Systems
Check the with encoding interval from profile: box and select
an encoder profile to set the associated encoding interval for
alarm recording.
Check the Export to FTP box to send standard H.264 files to
the FTP server whose address is displayed.
If an FTP server has not yet been defined, click Configure FTP
server to jump to the FTP Posting page where the server
information can be entered.
Alarm triggers
Select the alarm type that is to trigger an alarm recording:
– Alarm input (if applicable)
– Motion/Audio alarm
– Video loss alarm
Select the Virtual alarm sensors that are to trigger a recording,
via RCP+ commands or alarm scripts, for example.