Filter
Top Products
52 en | Recording Camera Browser Interface
AM18-Q0611 | v5.50 | 2012.03 Software manual Bosch Security Systems
SD card recording performance is highly dependent on the
speed (class) and performance of the SD card. An SD card of
Class 4 or higher is recommended.
Note:
If a device had primary and secondary recording running on the
SD card and is then added to a VRM system, the blocks used for
primary recording will not be re-used, reducing the available
recording space for ANR recording. This can be solved by re-
formatting the SD card.
Throughput limit for simultaneous recording and local replay at
100% playback speed is:
– maximum total recording bit rate of 7 Mbps for external
iSCSI recording.
– maximum total recording bit rate of 10 Mbps for SD card
recording, depending on SD card performance.
10.1.3 Activating and configuring storage media
Available media or iSCSI drives must be transferred to the
Managed storage media list, activated, and configured for
storage.
Note:
A iSCSI target storage device can only be associated with one
user. If a target is being used by another user, ensure that the
current user no longer needs the target before decoupling that
user.
1. In the Storage overview section, double-click the required
storage medium, an iSCSI LUN or one of the other
available drives.
– The medium is added as a target in the Managed
storage media list.
– Newly added media is shown as Not active in the
Status column.