Filter
Top Products
Camera Browser Interface Encoder Settings | en 47
Bosch Security Systems Software manual AM18-Q0611 | v5.50 | 2012.03
To obtain the highest quality at the lowest bandwidth, even in
the case of increased movement in the picture, configure the
quality settings as follows:
1. Observe the coverage area during normal movement in the
preview images.
2. Set the value for Min. P-frame QP to the highest value at
which the image quality still meets your needs.
3. Set the value for I/P-frame delta QP to the lowest possible
value. This is how to save bandwidth and memory in
normal scenes. The image quality is retained even in the
case of increased movement since the bandwidth is then
filled up to the value that is entered under Maximum bit
rate.
9.1.9 Default
Click Default to return the profile to the factory default values.